34

Checking the program

When you reload or select a song that uses an effect, you also
have the option of loading the effect parameter setting that
were saved with that song, regardless of the physical posi-
tion of the EFFECT selector, PARAMETER, and EFFECT
RTN knobs. In this case, you can use the Effect screen to
check the effect settings.
1) Press the MENU button to access the Menu screen.
2) Use the cursor up/down buttons to select “3. EFFECT,”
and press the ENTER/OK button.
The Effect screen will appear.
In this state when you move the EFFECT selector or
PARAMETER knob, the screen will switch correspond-
ingly.
3) Press the EXIT/CANCEL button to return to the Menu
screen.
3. Saving effect settings
When you save a song that uses an effect, the current effect
settings will also be saved along with the song.
When you reload or select a song, you can choose whether
these settings will also be loaded. The effect settings consist
of the EFFECT program, and the positions of the PARAME-
TER knob and EFFECT RTN knob.
If you load these effect settings, they will apply regardless of
the physical position of the EFFECT selector and the PA-
RAMETER and EFFECT RTN knobs. However when you
move the selector or a knob, the setting will immediately
switch to the corresponding position.