Korg EMX-1 Preparations

Preparations

1	Connect the included AC/AC power supply to the EMX-1’s ~AC
	9V connector, and plug the AC/AC power supply to an AC outlet.

You must first connect the AC/AC power supply to the EMX-1, and then plug it into the AC outlet.

2 Connect audio cables from the EMX-1’s line out jacks (L/MONO,

R)to your mixer or powered monitor system (amplified speak- ers). If you are using a monaural connection, use the L/MONO jack.

3	If you are using headphones, plug them into the headphone jack.
	Sound will still be output from the line out jacks even if head-
	phones are plugged in.
4	Turn on the power switch.
	Slightly turn up the EMX-1’s master volume, and touch the drum
	part keys to produce sound so that you can check that the connec-
	tions are correct.
5	Adjust the EMX-1’s master volume, and the gain and faders of
	your mixer or powered monitor system to an appropriate listen-

ing level.

You must turn off the power before making connections. Careless operation can damage your speaker system or other equipment, and may cause malfunctions.

DRUM PART