Korg microX Objects in the Display and their functions

Objects in the Display and their functions
15
Quick StartIntroductionSetupProgram
Combination
MultiEffectGlobalArpeggiatorDrum Kit
External control
Other functions
Appendices
Objects in the Display and
their functions
a: Current page
This indicates the current page within the selected
mode.
From the left, this area shows the mode name,
page number: name, tab name, and the parameter
name of the edit cell.
b: Tab
Most pages are divided into two or more tabs.
Use the [PAGE+][PAGE–] buttons to select a tab
and view that page.
c: Parameters
The parameters for various settings are displayed
in the display. Use the ClickPoint [√][®][π][†]
to select the desired parameter.
d: Edit cell
When you use the ClickPoint [√][®][π][†], the
selected parameter will be highlighted in the dis-
play. This area is called the edit cell, and your
editing will affect the highlighted area. For details
on how to edit the value, see “3. Selecting a
parameter and editing the value” (☞p.20).
e: Check box
Use the ClickPoint [√][®][π][†] to select a
check box, and use the [VALUE] dial, the center of
the ClickPoint to add or remove the check mark.
When checked, the parameter will function, when
unchecked, the parameter will not function.
* Utility menu
When you press the [UTILITY] button in a page,
the utility menu will appear. The utility menu con-
tains commands that can be used in that page. The
utility menu that appears will differ depending on
the page that is selected.
For details on selecting and executing a utility
command, see “4. Selecting and executing a Utility
function” (☞p.21).
* Dialog boxes
When you select a utility menu command etc., a
dialog box will open.
Use the ClickPoint [√][®][π][†] to select param-
eters. To enter a parameter value, use the [V ALUE]
dial, the ClickPoint [π][†].To execute the utility
command, press the [MENU/OK] button.
If you decide not to execute, press the [EXIT/
CANCEL] button. The [EXIT/CANCEL] button is
equivalent to “Cancel,” “Done,” or “Exit.”
* Text dialog box
Use the ClickPoint [√][®][π][†] to select a text
button such as , and press the center to open the
text dialog box.
In this dialog box you can rename text (e.g., the
name of a program, combination, or multi set).
(☞p.114)
* Function buttons
Use the ClickPoint [√][®][π][†] to select one of
these buttons and press the center to execute the
following functions.
a: Current page d: Edit cell e: Check box
c: Parameters b: Tab
Mode name Page number:name Parameter name
Tab name