Korg music workstation/sampler

106

Insert effects

Select an effect for IFX1–IFX5, and set “Pan (CC#8),” “BUS

Sel. (BUS Select),” “Send 1” and “Send 2” for the signal

that has passed through each insert effect. If the “Chain”

check box is checked, the settings that follow the last IFX

in the chain will be used. “Send 1” and “Send 2” adjust the

amount of master effect that is applied to the signal that

has passed through the IFX.

You can edit these settings in the same way as for a pro-

gram (☞p.104), but you can use MIDI to control dynamic

modulation (Dmod), post-IFX pan (CC#8), Send1, and

Send2. This is particularly useful in Sequencer mode. An

“*” is shown at the right of Ch01–16 for channel numbers

whose track is routed to IFX. If multiple tracks with differ-

ent MIDI channel settings are routed to an IFX, this setting

speciﬁes the channel that will control the effect.

Master effects

Master EQ

These settings can be made in the same way as in “Effect

settings for a program” (☞p.105).

You can use the “Ctrl Ch.” to control these effects;

dynamic modulation (Dmod) on the speciﬁed MIDI chan-

nel will control the master effects or master EQ.

Effect settings in Sampling mode

In Sampling mode, an external audio source connected to

the AUDIO INPUT 1, 2, or S/P DIF IN jacks can be sam-

pled with insert effects applied. You can also apply an

insert effect to the samples assigned to a multisample, and

resample the result.

Routing

1Use “Input (SAMPLING)” to specify the external

audio input, and set the Sampling P0: Recording,

Input/Setup page “BUS (IFX/Indiv.) Select” parame-

ter to specify the bus (i.e., the insert effect) to which

the signal will be sent. (☞QS p.21)

The Input settings allow you to input simultaneously

from each input source.

The bus (the insert effect) to which the samples

assigned to the multisample will be sent is speciﬁed

by the Sampling P8: Insert Effect, Routing page “BUS

Select (Indiv.Out Assign)” parameter.

Insert effects

Select an effect for IFX1–IFX5, and set “Pan (CC#8)” for

the signal that has passed through each insertion effect. If

the “Chain” check box is checked, the settings that follow

the last IFX in the chain will be used.

Master effects

Master EQ

The master effects and master EQ cannot be used in Sam-

pling mode.