70
Applying an insert effect to a sample and
resampling it
The process of applying an insert effect etc. to a sampled
sound and then sampling it once again is called “resam-
pling.”
1In the P0: Recording, Recording page, assign the sam-
ple that you want to resample to “Sample Select.”
When the power is first turned on, the assigned sample
will be set to “Orig.Key” C2.
2Press the page menu button, and choose “Auto Sam-
pling Setup” from the menu.
A dialog box will appear.
3Choose “Auto Resample through IFX,” and select the
effect that you want to use.
4Press the OK button to execute the command.
Sampling settings will be made automatically.
Let’s take a look at the settings that were made auto-
matically.
Input 1 “BUS (IFX/Indiv.) Select”: Off
Input 2 “BUS (IFX/Indiv.) Select”: Off
Input from the INPUT 1, 2 jacks is turned off.
“Source BUS”: L/R
The sound sent to the L/R will be sampled.
“Trigger”: Sampling START SW
After you’ve pressed the SAMPLING [REC] key to
enter sampling-ready mode, resampling will begin
when you press the SAMPLING [START/STOP] key.
“Resample”: Auto
The sample assigned to the index will be resampled
automatically.
“Key”: C2
Use “Key” to specify the sample that will be resam-
pled.
“Recording Level”: –12.0
This is the default setting for resampling.
“Save to”: RAM
The data will be written to sample memory (RAM).
“Sampling Mode”: Stereo
The sound of the internal L/R channels will be sam-
pled in stereo.
“Auto +12dB On”: On
The “+12 dB” setting will automatically be turned on
for the samples you record.
“BUS (IFX) Select”: IFX1
The output of the sample will be sent to IFX1. (☞step
6)
Be aware that if you change the “BUS” setting from
Off to L/R or IFX1–5, the volume level sent to the
AUDIO OUT L/MONO and R jacks and the head-
phones may rise excessively.
5In P2: Loop Edit, check the “+12 dB” setting.
By making the following settings, you will be able to
resample at the optimal level.
If “+12 dB” is not checked:
“Recording Level”: +0.0 (dB)
(P0: Recording, Recording page)
“Auto +12 dB On”: Off (unchecked)
(P0: Recording, Preference page)
If “+12 dB” is checked:
“Recording Level”: –12 dB (dB)
(P0: Recording, Recording page)
“Auto +12 dB On”: Off (checked)
(P0: Recording, Preference page)
6In the P8: Insert Effect, Routing page, you can see that
“BUS (IFX) Select” is set to IFX1.