5Connecting and Operating the 621T, 621R
iAlways switch off the power to each device before connecting it to your 621T, 621R. After connecting your 621T, 621R, connect its power and then switch on the power to each device.
We recommend testing your system configuration by first connecting the entire system (as illustrated in Figure 3), using short copper cables instead of optical fiber cables.
To connect the 621T, 621R as illustrated in the example in Figure 4:
You can use the 621T and 621R to configure a DVI optical transmitter and receiver system as illustrated in Figure 3: the source connects to the 621T, the 621R connects to the display, and both transmitter and receiver are interconnected via fiber optics and UTP cabling.
| Optic Fiber Cables up to 100 meters |
|
621T |
| 621R |
Transmitter | DDC Cabling up to 100 meters | Receiver |
|
|
Figure 3: 621T and 621R DVI Optical Transmitter and Receiver System
5.1Connecting the 621T/621R DVI Optical Transmitter/Receiver
To connect the 621T DVI Optical Transmitter with the 621R DVI Optical Receiver, as the example in Figure 4 illustrates, do the following:
1.Connect the DVI source (for example, a computer) to the 621T DVI IN connector, using the DVI cable.
Make sure that the system is not powered up when connecting the DVI source.
2.On the 621R, connect the DVI OUT connector to the DVI acceptor (for example, a display), using the DVI cable.
3.Remove the module dust covers and connect each duplex LC fiber cable
8 | 621T, 621R - Connecting and Operating the 621T, 621R |
|
|
