Connecting the SDI Color Bar Generator
Connecting only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may adversely influence signal quality
Positioning your Kramer 820 SDI Color Bar Generator in a location free from moisture and away from excessive sunlight and dust
Figure 1 and Table 1 define the 820 SDI Color Bar Generator:
Figure 1: 820 SDI Color Bar Generator
Table 1: Features and Functions of the 820 SDI Color Bar Generator
# | Feature | Function | |
1 | 12V DC | +12V DC connector for powering the unit | |
2 | OUT 1 BNC Connector |
| |
3 | OUT 2 BNC Connector | 4 SDI (digital) video outputs | |
4 | OUT 3 BNC Connector | ||
| |||
5 | OUT 4 BNC Connector |
| |
6 | ON LED | Illuminates when receiving power | |
7 | 625 / 525 Selector Switch | Selects 625 line (50 Hz) when released; selects 525 line | |
|
| (60 Hz) when pushed in |
4 Connecting the SDI Color Bar Generator
To use your 820 SDI Color Bar Generator, connect one or more of up to 4 outputs, as follows:
1.Connect the SDI video BNC OUT 1 connector to the SDI video acceptor (for example, a monitor).
2 | KRAMER ELECTRONICS, LTD. |