Kramer Electronics PT201VGA user manual Technical Specifications

Technical Specifications

1.Connect the VGA source (for example, a PC) to the HD15F OUTPUT1 connector.

2.Connect the INPUT2 HD15F connectors to up to 2 VGA acceptors, as follows:

￿￿INPUT 1 to a VGA acceptor (for example, a monitor “Acceptor 1”)

￿￿INPUT 2 to a VGA acceptor (for example, a monitor “Acceptor 2”)

3.Push in the SELECT switch to route the source signal to Acceptor 1 (at input 1), or release it to route the source signal to Acceptor 2 (at input 2).

Figure 3: Connecting the PT201VGA 1x2 VGA Switcher

6 Technical Specifications

Table 2 includes the technical specifications:

Table 2: Technical Specifications3 of the PT201VGA 2x1 VGA Switcher

		INPUTS:	2 analog red, green, blue signals - 0.7 Vpp / 75￿, H & V sync, TTL level,
			on HD15F connectors
		OUTPUT:	1 analog red, green, blue signals - 0.7 Vpp / 75￿, H & V syncs, TTL level,
			on an HD15F connector
		BANDWIDTH (-3dB):	>1200 MHz
		DIMENSIONS:	6 cm x 6.5 cm x 2.5 cm (2.36" x 2.56" x 1") W, D, H
		WEIGHT:	0.14 kg. (0.31 lbs.) approx.
		ACCESSORIES:	Mounting bracket
1	Serves as the INPUT connector when operating in the opposite direction
2	Serve as the OUTPUT connectors when operating in the opposite direction
3	Specifications are subject to change without notice

4 KRAMER ELECTRONICS, LTD.