6 Connecting the Transmitter Receiver Pair
Always switch off the power to each device before connecting it to your Transmitter and Receiver pair. After connecting your Transmitter and Receiver pair, connect the power and then switch on the power to each device.
You can use the PT-571HDCPDVI Line Transmitter with the PT-572HDCP+DVI
Line Receiver to configure a DVI transmitter/receiver system.
To connect the PT-571HDCPto the PT-572HDCP+, as illustrated in the example
in Figure 3, do the following:
1.Connect the CAT 5 OUT RJ-45 connector on the PT-571HDCPto the CAT 5 IN RJ-45 connector on the PT-572HDCP+via a CAT 5 cable (see
Section 6.1).
2.On the PT-571HDCP, connect a DVI source (for example, a computer graphics source) to the DVI IN connector.
3.On the PT-572HDCP+, connect the DVI OUT connector to a DVI acceptor (for example, a display).
4.Connect the 12V DC power adapter to the power socket on the PT-571HDCPand/or the PT-572HDCP+and connect the adapter to the mains electricity (not shown in Figure 3).
8 | PT-571HDCP/PT-572HDCP+ - Connecting the Transmitter Receiver Pair |
| |
