
7.Insert the
Adjusting the Height of the Inner Frame
If needed, you can adjust the inner frame height to accommodate large or bulky cables. To adjust, perform the following:
1.Remove the height adjustment screws, while supporting the frame from underneath with your fingers.
2.Raise or lower the connecting surface to the required height, insert the screws, and tighten them in place.
KRAMER ELECTRONICS LTD.
Installation
Instructions
MODEL:
T1AF-26
Inner Frame
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.
We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com
!SAFETY WARNING
Disconnect the unit from the power supply before opening and servicing
P/N: