Your TP-125 / TP-126
5
4.1 Your TP-125 UXGA / Audio / Data Line Transmitter
The TP-125 is a high-performance transmitter that accepts:
A computer graphics input signal
An unbalanced stereo analog audio signal
RS-232 control commands
The TP-125 codes the signals and transmits them over CAT 5 cable to a
TP-126 receiver. The stereo analog audio signal is converted to the digital
audio (S/PDIF) stream before transmitting, thus preserving the quality of
the audio source signals. Commands and data can flow in both directions
via the RS-232 interface, allowing status requests and control of the
destination unit.
Figure 1 and Table 1 define the TP-125:
Figure 1: TP-125 UXGA / Audio / Data Line Transmitter