Kramer Electronics tp-145 user manual Acquiring the Edid, To load the default Edid

Acquiring the EDID

Table 5: TP Connector Pinout

EIA /TIA 568A

PIN Wire Color

1Green/White

2Green

3Orange/White

4Blue

5Blue/White

6Orange

7Brown/White

8Brown

Pair 1	4 and 5
Pair 2	3 and 6
Pair 3	1 and 2
Pair 4	7 and 8

EIA /TIA 568B

PIN Wire Color

1Orange/White

2Orange

3Green/White

4Blue

5Blue/White

6Green

7Brown/White

8Brown

Pair 1	4 and 5
Pair 2	1 and 2
Pair 3	3 and 6
Pair 4	7 and 8

1234 5678

12 4 5 78 36

Figure 6: TP Connector

6Acquiring the EDID

The TP-145transmitter can capture the EDID information from a display device.

To load the default EDID:

1.Plug the 12V DC power adapter into the power socket on the TP-145and connect the adapter to the mains electricity.

2.With no display device connected to the TP-145, press the EDID CAPTURE button.

3.The EDID STATUS LED flashes rapidly several times and the new EDID is copied.

To capture the EDID information from a display device:

1.Using a short cable1, connect the XGA INPUT 15-pin HD connector on the TP-145to the input XGA connector of the display.

2.Connect power to the display and switch it on.

3.Plug the 12V DC power adapter into the power socket on the TP-145and to the mains electricity.

4.Press the EDID CAPTURE button.

5.The EDID STATUS LED flashes slowly several times and the EDID is captured.

6.Disconnect the display.

1 For example, Kramer model number C-MGM/MGM-1

10 KRAMER: SIMPLE CREATIVE TECHNOLOGY