![](/images/new-backgrounds/1030101/3010155x1.webp)
(SECTION FIVE: AMPLIFIER OPERATION continued)
Adjusting Power Meter Modes
The Evolution One amplifier uses microprocessors to monitor RMS output voltage and current signals. This information is output to a custom front panel power meter (6) (7), which displays an accurate power measurement for the selected meter range on the power meter scale (6). The power meter has 4 modes of opera- tion accessed by the meter range button (12): 50 WATT range, 500 WATT range, 5000
WATT range, and OFF.
There are two ways to cycles between the operational modes:
Press the meter range button, located underneath the bottom right edge of the amplifier chassis front panel or,
Press the select key (SEL) on the Evolution Two preamplifier, on another Krell pream- plifier, or on the Universal Krell Touch Screen Remote.
Scale | Blue Front Panel LED | Blue Backlight & Meter Scale Light |
50 Watt | 50W LED illuminates | Illuminated |
500 Watt* | None | Illuminated |
5000 Watt | 5000W LED illuminates | Illuminated |
Off | Meter is inactive | Not illuminated |
*Factory default |
|
|
Power Meter Range and Power Meter Wand Action
The power meter (6) (7) enables you to monitor the power output of the Evolution One amplifier. The 500 Watt scale is the factory default. The 50 Watt scale range is the most sensitive, and displays the smallest changes in power output, with the greatest physical movement of the power meter wand (7). Conversely, the 5000 Watt scale is the least sensitive, and displays the largest changes in power output, with the smallest physical movement of the power meter wand.
Turning Off the Lights on the Amplifier
Channel Front Panel
When the meter range button (12) cycled to OFF, the lights on the front panels are
not illuminated.
24