Krell Industries manual KPS-30iINPUT AND OUTPUT DETAILS, Analog Output Connections

KPS-30i INPUT AND OUTPUT DETAILS

This is a description of the inputs and outputs of the KPS-30i. Please

contact your KRELLdealer or the KRELLstaff for assistance ff there are any questions not covered in this Reference. Please refer to the KPS-30i Typical

System Setup illustration on page 16.

CAUTION: When making connections to this component or any other, make sure

the power amplifier is OFF and the preamplifier is in the MUTEor STANDBY mode.

ANALOG OUTPUT CONNECTIONS

The KPS-30i is equipped with two analog output configurations: Single-ended

via RCAconnectors, and balanced via XLR connectors. If your preamplifier has high level balanced inputs, we recommend the balanced outputs be used. There are considerable sonic benefits to be gained with use of the balanced format.

The XLRpin configuration is described below.

Pin I Ground

°)

Pin 2 Non-inverting {0

°)

Pin 3 Inverting ( 180

The left and right channel RCAand balanced outputs are labeled on the back

panel. Care should be taken that the correct left/right orientation is maintained.

NOTE: These two outputs can be used to simultaneously feed different systems,

I0