D.BASIC INSTALLATION AND OPERATION
1.Place the unit on a firm level surface free fromexces- sive dirt or moisture..The KSL-2is not particularly hum sensitive, therefore other componentscan be placed on or around the KSL-2.Care should be taken howeverif the optional phonoboard is installed. Motors, power supplies and somedigital devices can induce hum through the phonoboard.
2.Plug the ACcord into the receptacle on the backof the unit. Plug the remainingend into the wall ACreceptacle. The pilot LEDwill illuminate.
NOTE:While the KSL-2has superb regulation and does not require a dedicated ACcircuit, westrongly advise against any connections through extension cords or mul- tiple ACadaptors. Highquality 15 ampline conditioners or grounded~Cstrips are acceptable.
NOTE:The KSL-2is designed to be left ONat all times.
OPTIONAL PHONO OPERATION
The KSL-2has an optional phonoboard available. The phono board is swichable f6r Movingmagnet and Mov- ing coil phonocartridges. Shouldthe phon, o. boardbe orderedat a later dat,~, a full descriptionot installation and operation is supplied with the phonoboard.
1.Withphonoboard install,ed, set the input impedance loading of the phonocartridge to the load impedance closest to the manufacturer'sspecification. The unit ,
comesfactory set,to 100 ohmsin the Movingcoil switch position. FolIowthe instructions in the KSL-2Phono
Manualfor exact set-up description should changesbe necessary.
