GETTING STARTED (CONT.)
BATTERYPOWER INFORMATION
Your Krown 200 is designed to operate from battery or AC (house electricity) power.. The battery is
used for backup memory and for power outages. If you unplug the AC adapter from the machine, the
Ni-Cad battery will operate for approximately 3 hours when fully charged. The battery will
automatically recharge whenever the unit is plugged into the AC charger/adapter and the TDD is
turned OFF. To help the battery last longer, let it run down until the Power Light starts to flash
(BRIGHT -dim- BRIGHT -dim-). This means that the battery is running down and needs recharging.
The light will flash for several minutes. Then the Krown 200 will stop working. When this happens,
you must change over to AC power to continue using your machine until you recharge the battery. It
is suggested that you use the Krown 200 with battery power in a regular cycle. That is, operate the
unit on battery power until it needs recharging. Then recharge the battery by plugging the TDD into
the AC charger/adapter for 12-14 hours. (The unit must be turned OFF in order to recharge.)
TDD ALERT
Each time your Krown 200 is turned on, the TDD Alert feature emits tones automatically without
interfering with any of the TDD functions. This feature is turned off if the electronic voice is
activated instead. These tones are to notify the party you are calling that a TDD call is being received.
The moment another TDD answers, the tones automatically stop. If you do not want the TDD Alert
tones to be sent automatically, press the [CTRL] & [S] keys at the same time.
PRESS: will be displayed. Press [N] if you do
not want to send the tones, otherwise
press [Y].
MESSAGE RETRIEVAL
Prints all conversation and auto answer messages.
CTRL +STDD ALERT ON? Y/N
10
CTRL SHIFT
++5