Description
aLid
bWater Tank
cPivoting filter holder
dFlavor Release Technology holder
e Thermal coffee carafe with lid
f Thermal carafe base
g Water level indicator
h On/Off indicator switch (#197)
i Cord storage
Timer Models (#199 & #229)
j Hour setting control
k Minute setting control
l On/Off Indicator light
m Rotating selector switch
The benefits of the Aroma-
Control Therm coffee maker
Exclusive Flavor Release Technology
-Releases the full aroma of the coffee through a new brewing innovation:
At the beginning of the brewing cycle, the ‘Flavor Release’ mechanism remains closed so as to keep the hot water in contact with the ground coffee for a longer period of time and thus obtain the maximum flavor from your coffee.
After about 1 - 2 minutes of brewing, the coffee is released and flows into the coffee carafe.
The KRUPS exclusive Flavor Release Technology thus guarantees you optimal contact between water and ground coffee and the ideal time for brewing, particularly for small quantities.
Thanks to the KRUPS exclusive technology, your coffee will have a fuller, richer aroma and a delicious taste.
- Lid for thermal coffee carafe
When the thermal coffee carafe is inserted in the coffee maker, the middle of the lid retracts
to let the coffee filter through while the lid remains tightly screwed on the carafe to retain heat.
When the brewing process is complete, the specially designed sealing system keeps coffee fresh and warm for up to five hours. To pour your freshly brewed coffee, the lid only needs to be turned a half of a revolution counterclockwise, not removed.
‘Stop ‘n Serve’ Feature
Lets you pour a cup or two while brewing. The automatic filter seal will allow you to remove the carafe for 20 seconds without dripping coffee onto the thermal carafe base.
Note: KRUPS AromaControl will shut off automatically after the brewing is complete for added safety.
Before first use
Setting the time (models 199 & 229)
•Plug in the KRUPS “AromaControl Therm Time”. Make sure the rotating selector (m) switch is in the “off” position.
The LCD display will be flashing intermittently. This is your signal to set the digital clock.
•Turn the selector switch to position 
(m). Set the hours and minutes by pressing the “h” and “min” buttons respectively.
The time is now set.
Running with water only
•Before first use, cycle the appliance once or twice with water (without coffee) to help remove any factory sediment.
•Open the lid (1).
•Fill the water tank with cold water (2).
The water level indicator (g) of the water tank is measured in cups of water.
•Close the lid.
•Turn the machine ‘on’ to begin (position (h) for #197, position (m) for #199 & #229). The indicator light will illuminate.
Please note: Your AromaControl coffee maker is fitted with a Flavor Release filter holder (exclusive to KRUPS).
9
