KTI Networks DH-8T manual Connect one end of the UTP cable to the jack labeled 8C of Hub A

When the number of 10Base-T nodes in your network exceeds eight, you need to connect at least two hubs to integrate all 10Base-T nodes into one network. You may connect one hub to another hub by using an ordinary UTP cable as the following steps:

1.Connect one end of the UTP cable to the jack labeled '8C' of Hub A.

2.Connect the other end of the cable to any available MDI-X jack of Hub B.

The maximum length of the UTP cable connecting two hubs is 100 meters.

6