Kuppersbusch USA 604.2, KC 906.2 Using the automatic boost function, Switching off a cooking zone

When pressing the plus sensor, the cooking zone starts at cooking setting 5, without boost.

When pressing the minus sen-

sor, the cooking zone starts at cooking setting 9.

This automatically starts the automatic boost.

Using the automatic boost function

All cooking zones are equipped with an automatic boost function. Maximum power is used for the boost. The time period of the boost depends on the selected cooking setting. After the elapsed time, the cooking zone automati- cally switches back to the selected cooking setting.

If the cooking zone is yet not in use

– Press the minus sensor until the required cooking setting is dis- played. The boost function switches on automatically.

During automatic operation an “A” lights up in the display alternately with the selected cooking setting.

If you are already using the cooking zone

– Press the plus sensor again after reaching cooking setting 9. The automatic boost function is activated.

Switching off a cooking zone:

and

– Press the plus- and -minus sensor at the same time.

The “0” position is visible for about 2 seconds after the appliance switches off.

Switching off the cooking surface

All the cooking zones can be switched off quickly with the off- sensor.

Using a frying or dual-circuit cooking zone with- out the pan recognition sensor

As a rule, only the smaller cooking zone diameter is heated. However, when using frying pans and large saucepans, you may decide to switch on the outer cooking zone circuit.

Switching on the frying or dual-circuit zone:

– Press the cooking zone symbol next to the plus/minus sensor. A dot at the bottom right of the display for the cooking level in- dicates that the function has been switched on.

–Pressing the cooking zone sym- bol will once again deactivate the dual circuit cooking zone or frying zone.

Model EKE 854.1 and KC 906.2 only:

To heat a frying pan, you can use the two small, closely adjacent cooking zones. The temperature must be controlled via the setting controls for both cooking zones. We recommend that you set both cooking zones at the same cooking level.

Select the required cooking set- ting.

2 X

“A” lights up in the display alter- nately with the selected cooking setting.

6 KC 906.2 and EKE Users Guide USA with pan recognition