Rear Panel

GROUND

MODEL: GROOVE 600

 

 

 

LIFT

 

 

8A/250V

 

 

 

 

TUNER OUT

 

 

DIRECT OUTPUT

 

 

 

SPEAKER OUTPUT

 

 

 

 

 

 

 

 

600W RMS 3 Ohm

EFFECTS LOOP

 

 

KUSTOM INC

 

 

 

 

 

 

 

SERIAL NUMBER

CINCINNATI,OHIO USA

 

 

 

 

CAUTION

 

 

 

 

 

CHASSIS SURFACE HOT

 

 

 

 

 

ATTENTION

 

SEND

RETURN

FOOTSWITCH

DESIGNED IN USA

SUPERFICE DE CHASSIS CHAUDE

 

MADE IN CHINA

t

u

v

w

x

y

Circuit Breaker:

This circuit breaker will trip when too much current is applied to the amplifier. To reset: Turn off Power Switch, press circuit breaker button, and turn the Power Switch on. Note: If the Circuit Breaker trips repeatedly when AC power is applied, take the amplifier to an authorized service center for repair.

Power Cord:

This supplies AC power to the amplifier. If the cord becomes damaged, take the amplifier to an authorized service center for repair.

Speaker Output:

This jack is used to connect the amplifier to internal speakers, or an external speaker cabinet, using a heavy duty Speakond speaker cable. Note: To prevent overheating and possible loss of signal, do not connect a load lower than 2 ohms. (To connect a cable: Align tab on speaker cable connector slot. Insert and twist one quarter turn clockwise to lock. To remove a cable: Pull back release button on cable connector, twist connecter counter clockwise one quarter turn, and pull out connecter.)

Ground Lift Switch:

Activating this switch removes the ground connection on the Direct Output Jack. Removing the ground connection will eliminate ground related signal hum and noise.

Direct Output Jack:

This is a line level output used to connect the amplifier to another device, such as a mixer or recorder.

Pre EQ / Post EQ Switch:

When set to Pre EQ, the Direct Output Jack signal will be unaltered by the EQ sections of the preamp. When set to Post EQ, the Direct Output Jack signal will reflect the entire sound (including EQ settings) of the preamp. Note: The Master Volume Control and Solo On/Off Button have no effect on the Direct Output Jack signal.

z

{

}

Tuner Out Jack:

Use this jack to connect to a tuner or other line level device. This jack is always active and is a pre-gain output.

Effects Send Jack:

Use this jack to connect to the input of an external effects processor. This jack can also be used as a preamp out.

Effects Return Jack:

Use this jack to connect to the output of an external effects processor. This jack can also be used as a power amp in.

Footswitch Jack:

This 3-conductor 1/4” jack may be used for connecting a footswitch to the amplifier (Footswitch model KAC-GFS100 is included with the amplifier). The footswitch will then control the Mute and Solo features.

7

Page 7
Image 7
Kustom GROOVE 115C owner manual Rear Panel, 8A/250V

GROOVE 115C specifications

The Kustom GROOVE 115C is a powerful and versatile bass amplifier designed for musicians who demand quality sound and reliable performance. With a sleek and compact design, this amp is perfect for practice sessions, live performances, and studio recording, making it a favorite among bass players across various genres.

One of the standout features of the GROOVE 115C is its 15-inch custom speaker, which delivers rich and deep low frequencies, ensuring that every note resonates with clarity and punch. This speaker is paired with a robust power amplifier that provides ample wattage, allowing the amp to handle everything from quiet practice to full-volume gigs without distortion.

The amp comes equipped with an intuitive control panel, featuring a 3-band EQ that allows players to shape their tone to perfection. The bass, middle, and treble controls enable musicians to enhance their sound according to their preferences, catering to different styles and playing techniques. Additionally, the presence control adds an extra layer of customization, ensuring the highs remain crisp and clear.

The Kustom GROOVE 115C also includes a range of connectivity options, making it easy to integrate into any setup. It features a balanced XLR output for direct connection to mixing consoles or recording gear, as well as an auxiliary input for playing along with backing tracks. There is also a headphone output for silent practice, allowing musicians to hone their skills without disturbing others.

This amplifier is built with durability in mind. The rugged construction ensures it can withstand the rigors of gigging, while the lightweight design makes it portable and easy to transport. The classic Kustom styling, featuring a black tolex covering and a stylish grille, adds to its appeal, making it not just an effective tool but also an attractive addition to any stage.

Furthermore, the GROOVE 115C incorporates advanced technology such as a built-in compressor, which helps to maintain dynamic control without sacrificing tone. This feature is particularly useful for bass players playing in dynamic environments, ensuring that their playing remains consistent regardless of volume fluctuations.

In summary, the Kustom GROOVE 115C is a well-rounded bass amplifier that offers an impressive combination of powerful sound, versatile controls, and durable construction, making it an excellent choice for bassists looking to enhance their performance both on stage and in the studio.