Features of the RoadMaster®: Model No. RM 80-88D/RM 80-187D
Cut: | 88” or 187” with towed cutter option |
Cutter Assembly: | 1/4” thick steel cutter deck |
Cutting Height: | 4” to 8” height adjustment |
Blades: | Three (3) 3/8” hardened alloy steel blades |
Engine: | 80 HP Cummins, industrial, cast iron, overhead cam, |
| diesel engine |
Speed: | 0 to 11 mph (low/mowing range) |
| 0 to 24 mph (high/transport range) |
Slope: | 0° to 31° slopes, designed with low center of gravity for safety on |
| slopes |
| 20° with optional Rear Towed Cutter attached |
Steering: | Steering wheel directs the two 6” x 16”, 6 ply wheels mounted on |
| the front of the cutter deck. |
Tires: | 38” x |
| traction in rough or wet conditions |
Seating: | Tilting seat with restraining arms, to maintain level seating on |
| slopes |
ROPS: | Four point certified Roll Over Protection System (ROPS) and |
| retractable seat belt |
Cab: | Hard top canopy for sun protection |
Oil Reservoir: | 58 gallon hydraulic oil reservoir with oil/air separator, to prevent |
| foaming, overheating and water intrusion from condensation. |
Diesel Fuel Tanks: | 28 gallon; dual diesel fuel tanks on the front of the machine away |
| from the operator designed to fuel the engine on slopes |
Options and Accessories:
•Rear Towed Cutter – Cutting width: Rotary – 15’ 7" (187").
•Hydraulic controls in the cab allow the operator to raise, lower and engage the blades on each (left & right) deck independently. Towed cutter attaches or detaches from tractor, without tools, in 1 1/2 minutes
•Enclosed
The RoadMaster® design is patented.
