Kyocera 7135 Smartphone setup guide EÉäéÑìä=Üáåíë

jçÇÉã=pÉíìé=dìáÇÉ=Ñçê=íÜÉ=hóçÅÉê~=TNPR=ëã~êíéÜçåÉ Serial Modem Setup

8.You will then see a Windows alert for “Digital Signature Not Found”. Please ignore this and click vÉë to continue.

9.Click cáåáëÜ.

10.You should now be able to see the Kyocera Modem listed under Modems tab. Click lh.

eÉäéÑìä=Üáåíë

•Your computer may not ‘recognize’ your USB cable until you perform your first synchronization. Follow the on-screen instructions.

•Install the USB drivers ÄÉÑçêÉ connecting your USB cable to your computer. If you connect the USB cable to your computer before installing the drivers, it may cause the drivers to be installed in an incorrect location on your computer.

•^äï~óë reboot your computer after installing USB drivers, adding a modem, or creating a dial-up networking connection.

•Make sure the phone is on and the HotSync cradle is firmly connected.

•kçíÉW=The FaxModem MUST be running on Kyocera 7135 for the verification of the installed drivers and the unistallation of the device.

Kyocera Wireless Corp. 7