∙Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of 6 feet (2 meters).
∙Within
∙During nighttime, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.
NOTE: In case the atomic color weather station is not able to detect the WWVB- signal (disturbances, transmitting distance, etc.), the time can be manually set (please refer to notes TIME SET).
PROGRAM MENU:
TIME SET: The SET button moves through the program menu and the UP or DOWN button change the values.
∙TIME ZONE: Hold the SET button and the Time Zone will flash. Press and release the UP or DOWN button to select the Time Zone.
North American Time Zones are:
∙ | Atlantic | |
∙ | EST | Eastern |
∙ | CST | Central |
∙ | MST | Mountain |
∙ | PST | Pacific |
∙ | Alaska | |
∙ | Hawaii |
Press and release the SET button to continue.
∙DST: DST will show, and On or Off will flash. Press and release the UP or DOWN button to select the On or Off. Press and release the SET button to continue.
∙
∙HOUR: The Hour will flash. Press and release the UP or DOWN button to select the Hour. Press and release the SET button to continue.
∙MINUTES: The Minutes will flash. Press and release the UP or DOWN button to select the Minutes. Press and release the SET button to continue.
∙YEAR: The Year will flash. Press and release the UP or DOWN button to select the Year. Press and release the SET button to continue.
∙MONTH: The Month will flash. Press and release the UP or DOWN button to select the Month. Press and release the SET button to continue.
∙DATE: The Date will flash. Press and release the UP or DOWN button to select the Date. Press and release the SET button to continue.
∙WEATHER FORECAST ICON: Press and release the UP or DOWN button to select the forecast Icon that represents your current local weather. The forecast icon will flash. Press and release the SET button to exit.
∙NOTE: If possible, it is best to select the RAINY ICON when it is raining outside. This allows for the most accurate future forecasts based on barometric pressure changes.
WEATHER FORECAST ICONS:
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure. The weather forecast is based on atmospheric pressure change and is about
ALARM SET:
∙ALARM HOUR: Press and hold ALARM button to enter alarm time setting mode. The Alarm Hour will flash. Use the UP or DOWN button to set the Hour. Press and release the ALARM button.
∙ALARM MINUTE: The Alarm Minutes will flash. Use the UP or DOWN button to set the Minutes. Press and release the ALARM button to exit.
ALARM ACTIVATION:
∙Press and release the ALARM button once to show Alarm Time.
∙Press and release the ALARM button repeatedly to activate or deactivate the Alarm. The 
alarm icon appears when alarm is activated.
SNOOZE:
∙When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes. The alarm icon 
will flash when the snooze feature is active.
∙To stop alarm for one day, press AL button, while in snooze mode. The alarm icon 
will remain solid.
∙NOTE: When the alarm sounds, it continues for 2 minutes and then shuts off completely.
FAHRENHEIT/CELSIUS:
Display: Press and release the C/F button once to switch from Fahrenheit to Celsius.
MIN/MAX TEMPERATURE/HUMIDTY:
VIEW MIN/MAX:
∙INDOOR: When Indoor Temperature/Humidity is displayed, press the MAX/MIN button to view MAX, MIN and Current Indoor temperature/humidity.
∙OUTDOOR: When Outdoor Temperature/Humidity is displayed, press the MAX/MIN button
to view MAX, MIN and Current Outdoor temperature/humidity.
RESET MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset all min/max values.
HEAT INDEX AND DEW POINT:
INDOOR: When Indoor Temperature/Humidity is displayed, press the HEAT/DEW button and Indoor Heat Index and Indoor Dew Point will show briefly in the date display area.
OUTDOOR: When Outdoor Temperature/Humidity is displayed, press the HEAT/DEW button Outdoor Heat Index and Outdoor Dew Point will show briefly in the date display area.
AUTO SWITCH INDOOR/OUTDOOR DATA:
Press the AUTO button one time to enable the auto switch feature. This feature allows the station to alternately display indoor temperature/humidity and outdoor temperature/humidity every 10 seconds. The word AUTO will appear in the lower right display when this feature is active. Press and release the AUTO button to turn the feature off again.
BACKLIGHT:
A/C adapter: The backlight can be on continuously when operation with the
∙OFF: Hold the LIGHT ON/OFF button for 5 seconds to turn off the backlight, to sleep.
∙ON: Hold the LIGHT ON/OFF button again to turn the backlight on.
Battery power: The backlight will light for 8 seconds when operating on batteries only.
LOW BATTERY:
It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of this unit. A low battery icon will display next to the outdoor temperature when the transmitter batteries are low and next to the indoor temperature then the batteries in the weather station are low.
MAINTENANCE
∙Do not expose the display to extreme temperatures, vibration or shock. Keep dry.
Clean it with a soft damp cloth. Do not use solvents or scouring agents.
∙The product is not a toy. Keep it out of reach of children.
∙The product is not to be used for medical purpose or for public information, but is determined for home use only.
∙The specifications of this product may change without prior notice.
∙Improper use or unauthorized opening of housing will void the warranty.
∙If the unit does not work properly, change the batteries.
2
