charging current can be set up to 1500 or 1800 mAh when two batteries are charged.
Fast charging – 70 mins to charge up 2000 mAh batteries
Individual LCD display for all compartments
Charging both “AA” and “AAA” rechargeable batteries simultaneously
Overheat detection to protect rechargeable batteries from
Minus delta voltage
Damaged batteries detection
Discharge mode (first discharging and then charging) to remove memory effect of rechargeable batteries
Refreshing old rechargeable batteries by discharging/ charging cycles
Test function to check the capacities of rechargeable batteries
Charging/ Discharging functions can be launched independently and simultaneously to each rechargeable battery in the compartments
Various display modes during charging/ discharging – the charging current (in mA), time elapsed (in hh:mm), the terminal voltage (in V) and accumulated capacities (in mAh or Ah)
INVENTORY OF CONTENTS
1.Charging unit
4
Compartment Number key
Press and release the Number key to select a particular battery compartment for charge modes and/or display mode adjustment.
MODE key
The mode key shall first be pressed and held for about 1 second to activate the mode change. The subsequent pressing of the mode key will toggle between the “Charge”, “Discharge”, “Test” and “Refresh” mode. To change the operating mode for an individual rechargeable battery, first press the corresponding NUMBER key then press the MODE key.
DISPLAY key
Press and release to select the displays of the charging current (in mA), time elapsed (in hh:mm), the terminal voltage (in V) and accumulated capacities (in mAh or Ah) during the charging or discharging process.
To change the display content of a particular rechargeable battery, first press the corresponding NUMBER key then press the DISPLAY key.
6
2.Transformer
3.Size “C” battery adapter & Size “D” battery adapter (Total of 4 Adapters)
4.Holding Bag
5.“AA” rechargeable battery (4) & “AAA” rechargeable battery (4)
6.Instruction Manual
FUNCTION KEYS:
There are three
Compartment Number keys
CURRENT key
MODE key
DISPLAY
5
CURRENT key
Press to select the amount of current to be applied (within the first 8 seconds after batteries are inserted) in different operating modes (also see “Start charging the rechargeable batteries” below).
OPERATING MODES OF THE CHARGING UNIT
This powerful charging unit provides the following operating modes:
a.Charge the rechargeable battery (CHARGE) – to charge the rechargeable battery, automatically switches to trickle charge after the rechargeable battery is full.
b.Discharge then charge the rechargeable battery (DISCHARGE) – to discharge the rechargeable battery then charge it to minimize the memory effect.
c.Refresh the rechargeable battery (REFRESH) – to refresh the rechargeable battery to its maximum capacity by charging and discharging the rechargeable battery repeatedly until no further increase in the capacity is estimated. For old rechargeable batteries or those have not been used for a long time, refreshing may bring the rechargeable battery back to the optimum condition.
d.Check the rechargeable battery capacity in mAh/ Ah (TEST)
7
