Version 1.0 - 11/6/2008

NOTE: You can silence an Acoustic Weather Warning by pressing any Key.

Set Mode 3 - Set Text Scrolling Speed (1-4)

8.Press the “SET” Key until “Scr” flashes at the top and “SET SCROLL SPEED” scrolls across the bottom

9.The standard speed is set to “2”

10.There are four speeds available – “1” is the slowest and “4” is the fastest

11.Press the “+” Key to change the scroll speed.

12.Press the “SET” Key to save the current settings and advance to the next option

Set Mode 4 - View Device ID

NOTE: Device ID is a reference item for customer service only. You may press the “SET” Key again to exit SET mode if you are not asked to provide this number by customer service.

13.Press the “SET” Key until “SEC 1” appears at the top

14.The first part of the Device ID will appear at the bottom

15.Press the ‘+” Key to view second part of the Device ID under “SEC 2”

16.Press the “SET” Key to exit SET mode

Factory Reset of Wireless Display

NOTE: It is not possible to re-register a previously registered Wireless Display under a new account until the Wireless Display has been deleted from the user account on www.weatherdirect.com and a Factory Reset has been performed.

NOTE: Expansion Options that are Lifetime Upgrades are still active on your Wireless Display even if you delete it from your user account on www.weatherdirect.com or perform a Factory Reset. The selection of locations and other custom settings will need to be performed again if the Wireless Display is re-registered.

WARNING: The Factory Reset procedure will erase any registration and setup information from your Wireless Display. You must register the Wireless Display again with www.weatherdirect.com to use it after a Factory Reset.

Page 16 of 25

Page 16
Image 16
La Crosse Technology WD-3303 owner manual Factory Reset of Wireless Display, Set Mode 3 Set Text Scrolling Speed