Program Mode
Programming Note: If 30 seconds are allowed to pass or either the IN or the OUT button is pressed during programming modes, the unit will set the last information
A. Function Keys
There are four function buttons on the
B.Time Setting
1.Press and hold the “SET” button for 3 seconds
2.The hour digit will flash.
3.Press and release the “+” button to change the hour. Press the “+” button once and the hour will increase by one, twice and the hour will increase by two, etc.
4.Press and release the “SET” button to confirm the hour setting and to advance to the minute setting mode.
5.The minute digits should be flashing.
6.Press and release the "+” button to change the minutes— increasing the minutes by increments of 1 with each press of the “+” button.
7.Press and release the “SET” button to confirm the minutes and complete the time setting.
6