3)Once the system has been reset and you have a temperature reading from the sensor, temporarily place the remote temperature sensor in the previous location.
Note: If there is an outdoor temperature displayed when the two units are close together there was either too much distance between the two units previously or some type of interference that was causing poor reception.
4)If after 15 minutes the temperature is not displayed you will need to choose another location for placement of the temperature sensor.
5)The best way of doing this is to move the sensor 10 feet closer to the indoor temperature station.
6)After moving the remote temperature sensor please wait 15 minutes to give the indoor temperature station time to re- acquire the signal.
24
