LaCie EN English, LaCie 12big rack fibre/serial, Drive Installation, Quick Install Guide, page

LaCie 12big rack fibre/serial	Drive Installation
Quick Install Guide	page 1

EN English

1.1.Installing Drives

Caution: All drive bays must be fitted with either a drive carrier or dummy carrier module. No bays should be left empty.

Column 1 Column 2 Column 3 Column 4

Row 1

Row 2

Row 3

1.Ensure the anti-tamper lock is disengaged (see Figure 2).

Figure 1: Drive Anti-Tamper Lock

2.Release the carrier handle by pressing the latch in the handle towards the right and insert the carrier into the enclosure.

3.Gently slide the carrier all the way into the enclosure until it is stopped by the camming lever on the right of the carrier (see Figure 3).

4.The camming foot on the base of the carrier will engage into a slot in the enclosure. Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and holds the handle closed (see Figure 4).

Figure 3: Installing a Drive Carrier (2)

5.Carefully insert the anti-tamper lock key provided into the cutout in the handle and rotate the key in a clock- wise direction until the red indicator is visible in the aperture beside the key (see Figure 2).

Figure 2: Installing a Drive Carrier (1)