Setup
1.Connect the power supply.
2.Connect the Ethernet cable to the 2big and to your network through an Ethernet outlet or directly to a router, switch or hub.
3.Turn on the 2big by moving the power switch on the back to the ON position.
NOTE: Please allow approximately 3 minutes for the 2big to start up and become available on the network (the front LED will stop blinking).
4.Install LaCie Network Assistant on your computer from the LaCie Utilities
Windows users: click the Network Assistant icon in the system tray.
Mac users: click the Network Assistant icon in the menu bar.
Linux users: click the Network Assistant icon in the task bar.
off auto on |
Router |
Power | off auto on |
Switch |
|
