Land Pride specifications Features and Benefits, All Flex Mowers, AFM4522 Model, 11/14/08

Features and Benefits

All Flex Mowers

	AFM4522 Model
Features	Benefits
Counter rotation on left hand deck	Spreads grass clippings more evenly. Wing decks throw grass away from the rear
	deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.
Narrow 9’-6” transport width	Transport width allows unit to be transported with ease.
4 1/2” Deck overlap	Eliminates blade skips when turning. Tighter turns can be made.
Sleek frame design, including single	Design allows operator to make tighter turns without leaving windrows and skips.
beam hitch and compact deck overlap	The AFM virtually becomes a zero turn mower.
Automatic transport wing locks	When wings are raised in the full transport position, the wings lock in place. No
	need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
P27560SR Transport tires	Large Transport tires offer smooth roading and less grass compaction. Allows
with tapered bearings	grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles	Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with	Allows tighter turns without skips.
transportation tires
Rigid rear side deck tires	Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
Large deck flotation tires with sealant	Optional 15” tires for great flotation or 18” tires for even greater flotation. The larger
	the tire the less compaction in pounds per square inch allowing grass to stand up.
	Sealant in the tires minimizes flats.
1/4” Gauge wheel arms	Gives the cutter gauge wheel arms a great deal of “hidden” strength.
Low pivot points on deck	The lower the pivot points are to the ground, the more side to side swing, allowing
	for excellent flotation from each deck.
Deflectors built into mower decks	Safety features meet ANSI standards. Many competitors use chains for protection.
	Once chains are removed the unit may not meet ANSI specifications.
Rear discharge	Even dispersal, discharged items are always aimed downward. No rear chains are
	needed, which tend to clump damp grass.
Cat. 4 CV main driveline	Constant velocity main driveline allows for tighter turns without harming U-joints in
	driveline.
Cat. 3 slip-clutch wing drivelines	Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
Slip clutch protection	Guards against premature gearbox failure. Protects mower deck spindles.
Heavy center gearbox mounting plate	Handles start up torque.
Gearbox HP Rating	65 - 100 HP
Gearbox warranty	S/N 368187- one year on all gearbox components
	S/N 368188+ 5 years on gearbox housing, gears and shafts, 3 years on bearings
	and seals on gearbox.
Easy to grease blade spindles	No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards the	Uses less horsepower and allows material to escape the mower deck easier. The
back of the mower deck	discharge of the material is more even. Design eliminates windrowing.
Spring loaded idlers	Applies constant tension to belt to run efficiently.
Easy belt tension release	Easily release belt tension for changing belt or for winter storage.
High blade tip speed	(18,498 fpm) Lifts the grass up for a clean cut and efficient discharge of material.
	Tip rates as high or higher than the competition.
Choice of Blade	Low Lift - Highly recommended in sandy soils where lifting isn’t crucial. Disturbs
(Medium lift standard)	the soil very little, allowing blades to wear longer.
Others available thru parts dept.	Medium Lift - Medium suction for lifting grass. Requires less HP than high lift.
	High Lift - Greatest suction for lifting grass before cutting. Can take higher HP in
	tall dense grass. Not recommended in sandy soils.
	Mulching - Perfect for leaf mulching.

Designs, specifications, features and information are subject to change without notice.

11/14/08 315-360F 5