Land Pride
Assembly Instructions
FD25, AT25 & AT35 Front Roller
Refer to Figure 3:
Assemble roller (#1) to brackets (#2,#3)with the 3/4" lock nut (#4). The roller must rotate freely after assembly. Place assembly on the deck and mark hole locations. Drill 13/32 diameter holes for mounting the front roller assembly to deck. The roller should be approximatly 1/4 to 1/2" below the deck.
Assemble the front roller bracket (#2) with the 3/8" screw (#6) 3/8" lock washers (#5) and 3/8" nuts (#7) to the mower deck as shown. Assemble the other front roller bracket (#3) to the deck using the 3/8" hardware.
10897
FD25, AT25 & AT35 Front Roller
Figure 3
6/28/05 | FD15, FDR15, FD25, AT25 & AT3590 Front Roller Kit | 3 |
