Specifications & Capacities
Box Scrapers
MRL35, HRL35 & HR35 Series Retractable Box Scrapers
| 19” Lowback | 24” Highback | ||
| MRL3572 |
| HRL3578 | HR3584 |
Working Width | 72” |
| 78” | 84” |
Capacity | 23 cu. ft. |
| 26 cu. ft. | 31 cu. ft. |
Weight (Pounds) | 931 |
| 972 | 1117 |
Weight (with hydraulics) | Not Applicable |
| 981 | 1119 |
Number of Shanks | 8 |
| 8 | 8 |
Shank Material | 3/4” x 2 1/2” heat treated spring steel | |||
Shank Penetration | 3- positions (1”, 3” & 5” below scraper end plates) | |||
Shank Tip Construction | Replaceable heat treated | |||
Shank Beam | Pivots to lift shanks up; transport lock on shank tube | |||
Lift Mechanism | Manual lever w/ spring assist |
| Hydraulic cylinder | Hydraulic cylinder |
Moldboard | ||||
Side Panels | 1/2” thick x 19” high x 30” deep | 1/2” thick x 24” high x 30” deep | ||
Depth of Bucket | 28” |
| 27 1/2” | |
Cutting Blades | 2 ea. 1/2” x 6” high carbon, heat treated cutting edges; reversible and replaceable | |||
Maximum H.P. Rating |
|
| 65 HP |
|
Harden bushings in upper and lower hitch points | ||||
|
| Category l & II |
| |
|
|
|
|
|
26995
MRL3572 Not Shown
Designs, specifications, features and information are subject to change without notice.
21 |
| 2/21/09 |
