Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

6/06/06

PR2572 & PR2596 Powered Rakes 314-132M

1

Page 2 Page 4
Page 3
Image 3
Land Pride PR2572, PR2596 manual Safety at All Times
Page 2 Page 4

PR2572, PR2596 specifications

Land Pride PR2596 and PR2572 are premier models in the Land Pride product line, known for their exceptional performance and durability in the field of agricultural and landscaping equipment. These finishing mowers are designed to meet the demands of professionals looking for high-quality results with ease of use and reliability.

One of the standout features of the PR2596 and PR2572 is their cutting width. The PR2596 boasts a generous 96-inch cutting width, while the PR2572 offers a more compact 72-inch option. This versatility allows operators to tackle various mowing tasks, from large commercial properties to smaller residential lawns, ensuring a clean and precise cut every time. The mowers are equipped with a floating deck that follows the contours of the ground, ensuring that uneven terrain is no obstacle for a flawless finish.

The construction of these mowers is robust, built with heavy-duty materials that withstand the rigors of daily use. The steel frame and deck provide strength and longevity, while the reinforced edges prevent damage from contact with obstacles like rocks and tree stumps. Additionally, the powder-coated finish enhances durability by resisting rust and corrosion, making these mowers perfect for long-term outdoor use.

Land Pride's PR2596 and PR2572 feature a rear discharge design, which ensures that clippings are evenly dispersed across the lawn. This prevents clumping and promotes healthier grass growth by returning nutrient-rich clippings to the soil. The adjustable cutting height, ranging from 1 to 4 inches, offers the flexibility needed for various grass types and desired lawn appearances.

Another key technology in these models is the innovative blade system. The mowers are fitted with high-quality blades designed for efficiency and longer-lasting sharpness. This not only ensures a clean cut but also reduces the frequency of blade maintenance and replacement, saving time and costs for operators.

For user comfort, the PR2596 and PR2572 are designed with easy-to-use controls and settings. The quick-attach mounting system simplifies connecting the mower to tractors, while the operator-friendly design enhances maneuverability and reduces operator fatigue during long mowing sessions.

In summary, the Land Pride PR2596 and PR2572 finishing mowers represent the pinnacle of performance and efficiency in landscape management. Their combination of durable construction, advanced mowing technologies, and user-centric design makes them an outstanding choice for those seeking reliable, high-quality equipment to meet their mowing needs.
Top Page Image Contents