Maintenance, Driveline Clutch Optional | Land Pride RCR16 Series

Land Pride

Section 3 Maintenance and Lubrication

Maintenance

Proper servicing and adjustment can increase the life of any implement. With careful and systematic inspection, you can avoid costly maintenance, time and repair.

After using your cutter for several hours, check all bolts to be sure they are tight.

Replace any worn, damaged or illegible safety labels by obtaining new labels from your Land Pride Dealer.

Driveline Clutch (Optional)

Cutter drive components are protected from shock loads by a two plate slip-clutch. The clutch must be capable of slippage during operation to protect the gearbox, driveline and other drivetrain parts.

Prior to initial operation and after long periods of inactivity, the clutch should be "run-in" to remove any oxidation that may have accumulated on the friction surfaces.

Service Cutting Blades

1.Both blades should be sharpened at the same angle as the original cutting edge and must be replaced or re-ground at the same time to maintain proper balance in the cutting unit.

NOTE: Care should be taken in order not to remove any more material than necessary when sharpening blades.

2.Both blades should weigh the same after sharpening.

3.When replacing or sharpening the cutter blades, examine bolts for excessive wear and replace if necessary. To replace blades:

a.Order blade bolt Land Pride part # 802-277C.

b.Torque blade bolt lock nut to 450 ft. pounds. An extended cheater bar may be required to achieve proper torque.

IMPORTANT: Replace blades with genuine Land Pride blades only. Blades must be ordered and replaced in pairs.

If replacing dishpan, nut on gearbox output shaft should be torqued to 450 foot/pounds and cotter pin installed in nut with legs securely bent around nut.

Shearbolt Driveline

Shear Bolt Replacement

The Standard Shear Bolt Driveline is secured to the cutter with a shearbolt for protection of the driveline and gearbox. The shearbolt is designed to shear off when the blade impacts objects that the cutter is not designed to cut through. Should the shearbolt need replaced, replace with Land Pride part #802-264C. Refer to page 9 Figure 1-2.

IMPORTANT: A snap ring (Land Pride part #800-079C) is installed so that driveline does not come loose from the gearbox should the shearbolt shear.

!CAUTION

Engage parking brake, disengage PTO, shut off tractor, and remove key before making any of the following adjustments.

Clutch Run-In

Refer to Figure 4-1:

1.Using a pencil or other marker, scribe a line across the exposed edges of the clutch plates and friction discs.

13693

Clutch

Figure 4-1

2.Carefully loosen each of the 8 spring retainer nuts on the clutch housing a total of EXACTLY 2 revolutions. It will be necessary to hold the hex end of the retainer bolt in order to count the exact number of revolutions.

3.Start the tractor and engage the PTO drive for 2-3 seconds to permit slippage of the clutch surfaces. Disengage the PTO, then re-engage a second time for 2-3 seconds. Disengage the PTO, shut off tractor and remove key. Wait for all components to stop before dismounting from tractor.

4.Inspect the clutch and ensure that the scribed markings made on the clutch plates have changed position. If any two marks on a friction disc and plate are still aligned, this indicates that slippage has not

12/14/01

RCR16 Series Rotary Cutters 312-742M

RCR16 Series specifications

The Land Pride RCR16 Series represents a benchmark in the world of rotary cutters, specifically designed for those who demand efficiency, durability, and exceptional performance in land clearing and maintenance tasks. The RCR16 Series features a robust construction that ensures longevity and reliability, making it an ideal choice for both commercial and residential applications.

One of the standout features of the RCR16 Series is its heavy-duty design. The cutter is built with a reinforced frame that can withstand rigorous use, making it suitable for tackling thick brush and dense undergrowth. The cutter's durable materials ensure that it can endure the challenges posed by various terrains, allowing users to work effectively in diverse environments.

In terms of technology, the RCR16 Series employs a specially designed blade system that delivers superior cutting performance. The cutter is equipped with high-quality, heat-treated blades that maintain their sharpness over extended periods, reducing maintenance time and increasing cutting efficiency. The blade mounting system also allows for quick and easy adjustments, enhancing the overall user experience.

Another significant characteristic of the RCR16 Series is its versatility. The cutter comes in various sizes and configurations, making it adaptable to different tractors and uses. It can handle both tall grasses and heavy brush, providing users with the flexibility to manage their land according to their specific needs. Whether you are clearing a field or maintaining a roadside, the RCR16 Series rises to the occasion.

Safety features are paramount in the RCR16 Series, which includes a reinforced safety chain that protects against debris and unintended contact, ensuring a safer operation. Additionally, the cutter is designed with operators in mind, featuring easy-to-reach controls and a user-friendly design that minimizes operator fatigue during long hours of use.

Overall, the Land Pride RCR16 Series is a reliable and powerful tool that embodies quality and performance. Its heavy-duty construction, advanced cutting technologies, and versatile applications make it an exceptional choice for anyone looking to manage land effectively. Whether you are a professional landscaper or a dedicated landowner, the RCR16 Series promises to exceed expectations and provide years of dependable service.

Land Pride RCR16 Series manual Maintenance, Driveline Clutch Optional, Service Cutting Blades

Models: RCR16 Series