Land Pride RTA10 Series specifications Features and Benefits, 4/08/08

Features and Benefits

Rotary Tillers, Standard Tine Rotation

			RTA10 Series
Features			Benefits
Working widths		42”, 50”, 58” to meet a wide range of abdications and needs.
Gearbox Warranty		5 Years on housing, gears, seals, and bearings. shows our confidence in the product.
Tractor HP range		17-25 HP
Fits Land Pride		Allows for quick and easy one person hook-up. Does not offset with Quick-Hitch.
Quick-Hitch
Formed and reinforced rear		Keeps dirt in and leaves a level finish. Forming gives deflector additional strength.
deflector		Adjustable deflector allows for various finish results.
Clevis hitch		Provides additional strength and easy one person hook-up.
Adjustable lower hitches		Offset unit to cover right tire track.
Skid shoes		Control depth with seven adjustments.
6 1/2” Digging depth		For deep soil penetration.
Adjustable Parking stand		Easy hook-up and storage.
Plate steel hitch		Plate steel is stronger than flat bar type hitch
4 ‘C’ shaped tines per flange		‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft		1 3/4” Solid steel rotor shaft for strength.
15” Rotor swing diameter		For deep tilling and turning the soil over faster.
#80 Drive chain enclosed in oil bath		Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover		Stamped forming gives the chain cover strength.
Fully shielded shear pin or slip-		Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having
clutch driveline		to replace shear-pins.
American made		Many tillers are imported. American made means better parts availability.
Double lip seal on rotor bearing		Double lip seal helps keep the dirt out and the grease in.
	42” width	16”-26” std.	13”-29” Maximum Right	23”-19” Maximum Left
Offset Dimensions	50” width	25”-25” std.	18”-32” Maximum Right	32”-18” Maximum Left
	58” width	29”-29” std.	22”-36” Maximum Right	36”-22” Maximum Left

Designs, specifications, features and information are subject to change without notice.

4/08/08 311-252F continued on next page 66