Land Pride ZXT72 Pro, ZXT54 Pro Further Assistance, Folding ROPS Bar Assembly, Kit No. 357-273A

Land Pride

Further Assistance

Folding ROPS Bar Assembly

Refer to Figure 2:

1.Insert Roll Over Protective bar (#5) into mounting brackets (A & B). Mounting brackets (A & B) are located on either side of the mower frame directly behind the hydraulic oil expansion tanks.

1.Insert 1/2"-13 x 3 1/4" GR5 hex head cap screws (#3) through mounting brackets and ROPS (#5) mounting holes as shown.

2.Secure ROPS bar with 1/2" lock nuts (#4). Tighten lock nuts to 76 ft-lbs.

3.Rotate ROPS loop end (#6) up and insert locking pins (#2). Secure locking pins with hair pin clips attached to locking pins.

4.Hand tighten locking knobs (#1).

Further Assistance

Your dealer wants you to be satisfied with your new Roll Over Protective Structure. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:

1.Discuss the matter with your dealership service manager. Make sure he is aware of your problems and has had the opportunity to assist you.

2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.

3.For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpservicedept@landpride.com

24714

Folding ROPS Bar Assembly

Figure 2

Kit No. 357-273A		Folding ROPS W/Seat Belt, ZXT Pro Series
Qty.	Part No.	Part Description
4	802-099C	HHCS 1/2-13 X 3 1/4 GR5	. . . . . . . . Item 3 in Figure 2
4	803-019C	NUT LOCK 1/2-13 PLT	. . . . . . . . Item 4 in Figure 2
1	823-287C	ZXT FOLDING ROPS	Items 1, 2, 5 & 6 in Figure 2
1	840-073C	SEAT BELT	. . . Items 1 to 5 in Figure 1
1	357-274M	INSTRUCTION, ZXT ROPS INSTALLATION

Corporate Office: P.O. Box 5060

Salina, Kansas 67402-5060 USA

www.landpride.com

2 Manual No. 357-274M ■ 3/31/08