MODEL 2511

MODEL 2535

MODELO 2511

OPERATION (Figures 5 and 6)

This Fan may be operated by the Manual Controls located on top of the unit (as shown in Figure 5) or by the Remote Control (shown in Figure 6).

1. Place the Fan on a firm and level surface.

CAUTION: Plastic or rubber tabs, like the feet on this unit, may stick to furniture surfaces and/or hardwood floors. The unit may leave a residue that could darken, stain or leave permanent blemishes on the finish of certain furniture sur- faces, including wood surfaces, and/or hardwood floors.

2. Plug the cord set into a 120 volt outlet.

Be sure that the plug fits tightly into outlet.

When plugs fit loosely into receptacles, they may slip partially or completely out of the receptacle with only the slight movement of the attached cord. Receptacles in this con- dition may overheat and pose a serious fire hazard; if covered by a curtain or drape, the fire hazard is even greater.

3.Turn the Fan ON by pressing the Power Button ().

4.SPEEDS: Press the Fan Speed Button () to desired speed setting. Each time the Fan Speed Button is pressed, the speed will change from High (3), to Medium (2), to Low (1). When the Fan is turned OFF and ON again, the unit will resume the speed at which it was turned OFF.

5.OSCILLATION: Press the Oscillation Button () to start and stop the oscillation function.

6.TIMER: The timer function allows the unit to be set to operate for a length of time from 1 hour to 7 hours, in increments of 1 hour. Press the Timer Button () to set the length of time desired. Each time the timer button is pressed, the time is increased by 1 hour. After reaching 7 hours, pressing the timer button once more will reset the Fan to continuous running. The lights on the front of the unit will light up appropriately with the length of time that the Fan is set for.

7.To turn the Fan OFF, press the Power Button () and unplug the unit from the electrical outlet.

HERRAMIENTAS REQUERIDAS PARA EL

ENSAMBLADO (no incluidas)

- Destornillador de cabezal Phillips #2

ENSAMBLADO

1.Cuidadosamente retire el ventilador de la bolsa plástica y de la caja. Para facilidad de ensamblado, coloque el ventilador en forma horizontal para que la parrilla frontal esté apuntando hacia abajo.

2.Arme las Bases de Apoyo interconectando las Salientes en la Base de Apoyo A dentro de los Orificios de Salientes en la Base de Apoyo B. Introduzca el Cable Eléctrico a través del orificio grande en el centro de la Montura de la Base de Apoyo.

(Figura 1)

3.Asegure los (4) Tornillos #8 de X 9,9 mm en los cuatro orificios de la parte inferior de la base. (Figura 2)

4.Alinee las Lengüetas de Alineación de la Montura de la Base de Apoyo con las ranuras de alineación en la parte inferior del ventilador, teniendo cuidado de que el canal del cable en la parte inferior de la base de apoyo debe estar apuntando hacia la parte posterior del ventilador. (Figura 3)

5.Asegure la Montura de la Base de Apoyo a la parte inferior del ventilador con (4) Tornillos M5 de 12,7 mm de Largo. Suavemente elimine cualquier sobrante del Cable Eléctrico y colóquelo en el Orificio de Colocación del Cable. (Figura 4)

Montura de la Base de Apoyo

Ranura de

Alineación

Lengüeta de

Alineación de la

Montura de la Base

de Apoyo

Canal del Cable

Figura 3

Timer Button

Speed Button

 

Power

Base de Apoyo A

Oscillation

Button

Button

Figure 5

Base de Apoyo B

Salientes

Figura 1

Montura de la Base de Apoyo - Vista Inferior

Montura de la

Base de Apoyo

Tornillos

#8 X 9,9 mm

Figura 2

Montura de la Unidad de base a Parte Inferior

Montura de la

Base de Apoyo

 

Orificio de

Tornillos

Colocación del

Cable

M5 X 12,7 mm

Cable Eléctrico

 

 

Figura 4

New 9/08

4

2511ES

New 9/08

9

2511ES

Page 4
Image 4
Lasko 2511 manual Herramientas Requeridas Para EL, Ensamblado, Montura de la Base de Apoyo

2511 specifications

The Lasko 2511 is a powerful and efficient table fan designed to provide much-needed cooling relief during warm weather. Compact yet effective, this fan combines portability with advanced features, making it a popular choice for home or office use.

One of the main attributes of the Lasko 2511 is its lightweight design. Weighing only a few pounds, it can be easily transported from room to room, allowing users to stay cool wherever they are. The fan's small footprint ensures that it does not take up too much space, making it an ideal solution for tight living areas or workplaces.

The Lasko 2511 comes equipped with a three-speed fan motor. This feature gives users the flexibility to choose their desired level of airflow, ranging from a gentle breeze to more powerful cooling. The easy-to-use rotary dial located on the fan’s front allows for seamless adjustments, enabling quick control over the fan’s speed settings.

In terms of technology, the Lasko 2511 incorporates a unique blade design that maximizes air circulation. The oscillating function further enhances this capability by allowing the fan to distribute cool air across a wider area, ensuring that multiple people can enjoy its cooling effects simultaneously.

Durability is another characteristic of the Lasko 2511. Built with high-quality materials, this fan is designed to withstand daily use while maintaining performance over time. The sturdy base ensures stability, minimizing the risk of tipping over during operation.

Safety features are also a priority with the Lasko 2511. The fan includes a stable housing design and a covered rear grille to prevent accidental contact with the blades. This attention to safety is essential for households with children or pets.

The Lasko 2511 operates quietly, making it suitable for use in various environments, including bedrooms, offices, and living rooms. Users can enjoy the cooling benefits without the distraction of loud operational noise, which is particularly beneficial during nighttime use.

Overall, the Lasko 2511 table fan combines convenience, performance, and safety in a sleek design. Its adjustable speeds, effective oscillation, and durable construction make it a reliable choice for anyone seeking to enhance their comfort during the warmer months.