![Read all instructions before using this Fan.](/images/new-backgrounds/174691/1746913x1.webp)
MODELO 3635
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
1.Make certain the power source conforms to the electrical requirements of the Fan.
2.Make certain that the room is equipped with a working smoke detector.
3.Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.
4.To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.
5.Unplug power cord before installing, servicing, or moving the Fan.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.
6.This Fan must NOT be used in potentially dangerous locations such as flammable, explosive,
7.DO NOT use Fan in or near a window. Rain may create an electrical hazard.
8.When wallmounting, completely assemble the fan according to the Instructions before connecting to power supply.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully insert. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.
This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the at- tachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this plug. Call
9. | Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must |
| use an extension cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL |
| listed. NEVER use a single extension cord to operate more than one Fan. |
10. | NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in |
| any manner. |
11. | NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric |
| shock or fire, or damage the Fan. To reduce the risk of fire, DO NOT block or tamper with the Fan in any manner while |
| it is in operation. |
12. | Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate |
| the Power Cord so the Fan or other objects are not resting on it. Do not run cord under carpeting. Do not cover cord |
| with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from |
| traffic area and where it will not be tripped over. |
13. | This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other |
| water container. NEVER use Fan where flammable liquids are used or stored. |
14. | NEVER use Fan outdoors. |
15. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are | |
| confined. Please refer to National Electric Code (NEC) Article |
| dards relating to electrical requirements for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS |
| OF NEC ARTICLE |
16. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or ap- | |
| plicable state or local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES |
| NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). |
FUNCIONAMIENTO (Figura 1)
1.Cuidadosamente retire el Ventilador de la caja.
2.Coloque el ventilador sobre una superficie firme y nivelada.
ADVERTENCIA: Los tacos de plástico o hule, tales como las patas de esta unidad, pueden pegarse a la superficie de los muebles. La unidad podría dejar un residuo capaz de oscurecer, manchar o dejar marcas permanentes en el acabado de ciertas superficies de muebles, incluyendo superficies y pisos de madera.
3. Conecte el cable eléctrico a un tomacorriente de 120 V~.
Asegúrese que el enchufe encaje firmemente en el tomacorriente.
Cuando los enchufes quedan flojos en los tomacorrientes, pueden deslizarse parcial o completamente fuera del tomacorriente con un leve movimiento del cable adosado. Los tomacorrientes en este estado podrían sobrecalentarse y representar un grave peligro de incendio; si está cubierto por una cortina o tela, el riesgo de incendio es aún mayor.
4.Para ajustar la direccion del aire, simplemente jire la cabeza del ventilador.
5.VELOCIDAD DEL VENTILADOR: Ahora puede ajustar la velocidad del ventilador al nivel deseado - (3) Alta, (2) Mediana ó (1) Baja - pulsando el Perilla Velocidad en el Ventilador.
6.Después de apagar el Ventilador, desconecte la unidad del tomacorriente eléctrico.
Perilla
Velocidad
PARA MONTAR EN LA PARED
ESTE VENTILADOR se DEBE MONTAR EN UNA SUPERFICIE PLANA ESTRUCTURALMENTE SOLIDA.
Montar conveniente que las anclas deben ser utilizadas para montar el ventilador a la pared.
Al montar el Ventilador a la pared, el conjunto de cuerda debe ser situado en el espacio entre el Cuerpo Trasero del Ventilador y la Yunta del Ventilador. (Figura 2)
Los agujeros de
Yunta De montaje
Ventilador
El Cuerpo trasero de Ventilador
Figura 2
|
| Provided with an integral speed controller. Do not use with an external solid | |
|
| ||
|
| state speed control device. |
|
|
|
| |
| SAVE THESE INSTRUCTIONS |
| |
New 9/11 | 2 | 3635ES |
Figura 1
New 9/11 | 7 | 3635ES |