Lava Computer SFX-05 manual Not So Clean Boost, Battery

(Not So) Clean Boost

Want to clobber the input of your cool old tube amp? Play this sound through it and hear how raunchy that amp can really get. Use the Rumble control to dial in just the right amount of low end.Yeah!

Battery

To make your Lava Box work, you’ll either need to insure that a fresh 9-volt battery is installed or connect a regulated 9-volt DC power supply—such as a Seymour Duncan 9-volt power adapter.

To install or replace the battery:

a. Remove the four screws on the underside of the box and disassemble the chassis.

b. Remove the old battery from the clip, if applicable.

c. Install a fresh 9-volt alkaline battery, taking care to properly orient the “+” and “-” terminals.

d. Reassemble the chassis and replace the screws.

When storing the Lava Box, or when it is not in use, make sure no cable is plugged into the Input jack, as this will shorten battery life.

6