LER 4411
Twist™
Flexible Digital Microscope
Twist™ User Guide
• Please retain these instructions for future reference.
• Do not allow your Twist™ to come into contact with water or other liquids.
• In the event of an
Twist™ User Guide
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
Twist™ User Guide
Know Your Twist™
Twist™ User Guide
Twist™ Controls
There are two buttons on the base of the Twist™:
• Press the snapshot button to take a new picture
Twist™ User Guide
Twist™ User Guide
Click this icon to take a picture. Pictures taken will be stored in the Folder “C\MyPic130” by default
Twist™ User Guide
Using the Flexi-Measure software
may malfunction. In this case, you may need to disconnect from the computer to reset it.
• Warranty is void if the case is opened for any reason.
• The warranty does not cover any data loss from the unit nor any consequential loss of information.
FCC compliance
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Bendy gooseneck
Focus wheel
• Press the Light button to turn on the LEDs
In addition to the camera button, Twist™ has a 3.5 mm mono jack socket so that external switches can be used to take pictures.
Marking on label shows reference figure for measurement (for user with
Using the Twist™/Flexi-Scope™ software
Video settings
Start video recording and choose the Video settings. Videos will be stored in C\MyVideo130 by default
Allows the user to take pictures and video automatically at set intervals
Click this icon to launch the
Dimension tools
Color & font 
Foot notes 
Measurement settings
Before measurement, you need to know the
Capture the image and read the magnification
X10~X200 1.3 MP Digital Microscope
Please Read All Instructions Carefully Before Using
SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
LED lights 
LED light on/off 
Photo button 
To adjust the focus, rotate the adjustment wheel slowly
Place CD into
Control Panel
Current image
Maximize image 
Main display
Saved images
Click this icon to Exit the program
Magnification reference number of the captured images and enter it into the magnification box”
reference number from the focus wheel. Enter this figure into the magnification box
User Guide
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
2
3
Ext photo switch socket
4
until the image on the screen is clearly displayed.
5
To start the program, go to “Start” 
6
7
8
