Available flash settings by recording mode

- If you bring the flash too close to an object, the object may be distorted or discoloured by the heat or lighting from the flash.

- When you take a picture beyond the BWBJMBCMFnBTISBOHFUIFFYQPTVSFNBZ not be adjusted properly and the picture may become bright or dark.

- When the flash is being charged, the flash icon blinks red, and you cannot take a picture. When [AUTO LCD OFF] is set, the LCD monitor turns off and the status indicator lights.

- The white balance may not be properly adjusted if the flash level is insufficient for the subject.

- When the shutter speed is fast, the flash effect may not be sufficient.

- It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears.

- The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident.

Available

Not available

Initial scene setting

1 When is selected, , or is set depending on the type of subject and brightness.

33