Lennox Hearth 20 FS-2, 30 FS-2 3

CONGRATULATIONS!

When you purchased your new pellet stove, you joined the ranks of thousands of individuals whose answer to their home heating needs, aesthetics, efﬁciency and our environment. We extend our continued support to help you achieve the maximum beneﬁt and enjoyment available from your new pellet stove.

It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure you years of trouble free warmth and pleasure.

Thank you for selecting a Whitﬁeld® stove as the answer to your home heating needs.

LISTING / TESTING

Listing: The listing laboratory is ITS (Intertek Testing Services) and the listing mark is Warnock Hersey.

Testing: In accordance with the speciﬁcations and procedures listed in UL 1482 / ULC S627 and ASTM E1509 for solid fuel room heater, this appliance has been independently tested to UL, ULC and CSA standards. UL 1482 / ULC S627 states requirements for installations as

TABLE OF CONTENTS
Important Safety Information ........	Page	2
Packaging List................................	Page	3
Testing / Listing, EPA .....................	Page	3
Using this Manual ..........................	Page	3
Planning Your Installation ..............	Page	4
Selecting a Location.......................	Page	4
Floor Protection .............................	Page	4
Fireplace Warning Label.................	Page	7
Clearances .....................................	Page	6
Manufactured Home Installation ...	Page	8
Installation ....................................	Page	8
Venting Requirements....................	Page 10
Care and Operation ........................	Page 19
Fuel ................................................	Page 22
Routine Maintenance .....................	Page 22
Speciﬁcations.................................	Page 29
Component Deﬁnitions ..................	Page 32
Wiring Diagram..............................	Page 32
Troubleshooting .............................	Page 33
Replacement Parts List & Diagrams ..	Page 35
Optional Accessories......................	Page 41
Safety / Listing Label & EPA Label .Page 42
Installation Tips..............................	Page 44
Simple Operating Instructions .......	Page 45
Ownership Records........................	Page 46

Thisinstallationandoperationmanualwillhelp you obtain a safe, efﬁcient, dependable installation for your appliance and vent system.

PLEASE READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE BEGINNING YOUR INSTALLATION

PACKAGING LIST

The assembled pellet stove and Þreplace insert models ProÞle¨ 20 FS-2, ProÞle 30 FS-2 and ProÞle 30 INS-2 are packaged with an accessory package which contains the following:

One	- Installation and operation instructions
		manual
One	- Warranty
One	- Power cord
One	- Control board – Proﬁle 30 INS-2
		only
One	- Screw, #8 x 1/2” TEK (for mounting
		control board) – Proﬁle 30 INS-2
		only
One	-	Grate scraper
One	-	Lower trim
One	-	Wall thermostat w/ 20 foot roll of wire
One	-	Allen Wrench
Eleven -		Screws, #8 (for hopper cover on insert
		only)
One	- Brush, Heat exchange tube – Proﬁle
		30 Series only
Two	-	Leveling bolts, 1/4-20 x 3” – Insert
		only
One	-	Fireplace Warning Label (insert only,
		see Page 7)

Surround Kit (For ProÞle 30 INS-2 Only) (Purchased separately, see Page 41) Kit is packaged with:

One - Top surround panel One - Left surround panel

One - Right surround panel with door One - Left side trim

One - Right side trim One - Top trim

Two - Corner keys (“L” shaped brackets)

afree-standing room heater, hearth insert for masonry ﬁreplaces listed to UBC 37 or ULC S628, or factory built (zero clearance) ﬁreplaces listed to UL 127 or ULC S610. The safety / listing label is located on an inside hopper surface of the pellet stove. Please read this safety label carefully. It contains important information about installation and operation of this appli- ance. This appliance is tested and listed for residential installation according to current national and local building codes as:

•A Free-Standing Room Heater – FS

•A (Fireplace) Insert Room Heater – INS

•A Manufactured Home Heater – FS & INS

EPA (Environmental Protection Agency)

Status: EPA Exempt - Pellet appliances that are designed with the combustion air supply exceeding the 35 to 1 (by weight) ratio are exempt from EPA regulations and are “non- affected facilities.”

USING THIS MANUAL

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The homeowner’s Care and Operation Instructions included here will assure you have many years of dependable and enjoyable service from your appliance.

PRODUCT IS SUBJECT TO CHANGE WITHOUT NOTICE

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE