FIREPLACE KITS AND ACCESSORIES

750,210M

Rev. A 07/2006

BI-FOLD GLASS DOORS

INSTALLATION INSTRUCTIONS FOR OUTDOOR BI-FOLD GLASS DOORS

MODELS: 36BFOD-BS & 42BFOD-BS

These bi-fold glass door assemblies have been designed for use with and may be easily fitted to your Lennox Outdoor Gas Fireplace, Models E36ODG & E42ODG.

Do not alter or modify these door assemblies or a fireplace malfunction or a fire hazard may result.

These doors have been tested and listed by Omni-Test Laboratories Inc.PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.
GENERAL INFORMATION

The door assembly consists of a right and left glass panel assembly with the door handles factory mounted. Included is a four piece door frame with eight (8) screws and a hood (hood packaged separately), which are required for assembly. Fireplaces listed on the front page of this document, have been designed to accept these doors with minimum effort.

TOOLS REQUIRED
•Medium Phillips Screwdriver • 3/8" Open-end wrench•1/4" Drive Socket
INSTALLATION INSTRUCTIONS
Remove Screens And Rods:

Using a 5/16" socket or nutdriver, remove the screen rod assemblies (see Figure 1 ). Remove the screen rod screws as shown in Figure 1. Pull out the rods from locating holes on the side of the firebox opening.

IMPORTANT! REINSTALL SCREEN ROD SCREWS INTO THE EXISTING HOLES WHERE REMOVED.

The screen and rod assemblies must not be installed when the Bi-Fold Glass Door Kit is installed. You may wish to retain the screen and rod assemblies is case the Bi-Fold Glass Door Kit is ever removed in the future.

IMPORTANT! IF THIS OPTIONAL BI-FOLD GLASS DOOR KIT IS EVER REMOVED, THE ROD AND SCREENS MUST BE REINSTALLED FOR SAFE OPERATION OF THE APPLIANCE.

Screen RodScrewsScreen AndRod Assembly

Figure 1

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE