Begin the assembly by installing the hood (packaged separately). Be certain to remove any protective plastic coatings for the stainless steel parts before installing those components.
Step 1. Turn off the fireplace and allow it to cool before proceeding.
Step 2. Place the hood lip under the face top opening, as shown in Figure 2 - Step 1. Attach the hood with two (2) screws, one each side, as shown in Figure 2 - Step 2.
After assembly, the frame inserts under the hood as shown in Figure 4 and drops down inside the opening without fasteners.
Figure 2
Frame Assembly:Assemble the four piece door frame with the eight (8) screws provided as shown in Figure 3. Two spring clips attach inside the upper track as illustrated.
Screws (8)
Spring Clip
Figure 3
Figure 4
Door Installation:Step 1. Starting with the lower end of either the right or left hand door hold the door at a slight angle to the door frame outer edge with the top tilted toward the center.
Swing the lower corner of the door over the hole in the lower frame and engage the lower pivot pin into the hole on the lower frame of the firebox opening (Figures 5 and 6 ).
Pivot Pin | Roller Pin |
Lock |
|
Lower
Frame
Pivot
Point
Figure 5
2 | NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE |