Lennox Hearth BT8040 warranty Music player starts playing when connecting to the headset

I cannot use Reject call, call on hold, Redial or voice dialling

These features are dependent on the ability of your phone to support a hands-free profile.. Even if the handsfree profile is imple- mented reject call, call hold and voice dialing are optional features which are not supported by all devices.. Please consult your device manual for details..

Please note that some features can only be operated from the primary device e..g.. voice dial using Jabra BT8040 with 2 mobile phones..

The device is not connected to my headset in time to answer an incoming call

If the headset is off and is turned on when a call is incoming, the device and headset might not connect in time for the call to be answered.. In order to avoid such inconveniences please keep the headset on, in range and connected..

The music player starts playing when connecting to the headset

Some phones may stat the music player once it connects to the headset.. Re-pair your headset to the device in order to avoid this behaviour..

1.Make sure the headset is off

2.Press and hold the answer / end button for approx 5 sec until the light turns solid blue

3.Continue press and hold the answer / end button until the solid blue light turns off

4.Continue press and hold until a solid purple light turns on

Go through the regular steps in paring the headset to a Bluetooth device..

The music stream from my connected device is choppy or the music pitch is changing

If you have connected two devices and go out of range of one de- vice while playing music from the connected device, the headset will try to reconnect to the lost device.. This can cause the audio stream to be disrupted.. For example the music audio is choppy or the audio pitch varies.. In order to prevent this do not go out of range of your paired/connected devices..

english

Jabra bt8040 Bluetooth sterEo headset 11