HEARTH PRODUCTS

KITS AND ACCESSORIES

775,278M

DOUBLE DOOR SCREEN FACE KIT
Rev. A, 10/2008
MODELS DESIGNER™ AND RAVENNA™

 

 

 

INSTALLATION INSTRUCTIONS FOR INSTALLING DOUBLE DOOR SCREEN FACE

KITS for use with DESIGNER AND RAVENNA GAS FIREPLACE INSERTS

KIT CONTENTS (See Figure 1):

1 ea. Black Screen Face Assembly

1 ea. Instruction Sheet

TOOLS NEEDED:

None

Cat. No.
Model
Description

 

 

 

75028

SCREEN-DBV-RDV

Screen Face/Double Door/Black

 

 

 

GENERAL INFORMATION

If you encounter any problems, need clarification of these instructions or are not qualified to properly install this kit, contact you local distributor or dealer.

Read this instruction sheet in its entirety before beginning the installa- tion.

All of these parts may scratch and bend, great care should be used in handling them.

ALL WARNINGS AND PRECAUTIONS IN THE INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE APPLIANCE APPLY TO THESE INSTRUCTIONS.

TURN OFF THE APPLIANCE AND ALLOW IT TO COMPLETELY COOL BEFORE PROCEEDING.
INSTALLATION INSTRUCTIONS

The four hanging brackets are pre-mounted onto the back of the screen face. To install the screen face on the Designer or Ravenna gas insert, align the four hanging brackets with their corresponding mounting brackets, located on the left and right side of the insert. Set the hanging brackets onto the mounting brackets and slide the face down until the brackets are fully seated (see Figure 1).

Figure 1

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.

Printed in U.S.A. © 2008 Lennox Hearth Products
Lennox Hearth Products
P/N 775,278M Rev. A 10/2008
1110 West Taft Avenue • Orange, CA 92865