1.Place the rear log onto the two corresponding locating pins at the back of the firebox as shown in Figure 16.
Figure 16 Rear Log
2. Place the Front Right Log onto the two corresponding locating pins as shown in Figure 17.
Figure 17 | Front Right Log |
|
|
3. Place the Center Log onto the two corresponding locating pins as shown in Figure 18.
Figure 18 | Center Log |
|
|
4. Place the Front Left Log onto the two corresponding locating pins as shown in Figure 19.
Figure 19 | Front Left Log |
|
|
5.Install the Top Left Log onto the corresponding locating pin and indentation on Center Log as shown in Figure 20.
Figure 20 | Top Left Log |
|
|
6.Install the Front Center Log over the Front Right Log. The front of log will rest on the burner and the back of log will rest on rear log as shown in Figure 21.
Figure 21 | Front Center Log |
|
|
7.Install the Top Right Log into the corresponding indentations on Front Center Log and front right twig as shown in Figure 22.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. | 9 |