Lennox Hearth LSVFSD-24, LSVFSD-30, LSVFSD-8 1. Place rear ember bed as shown in Figure 1., Figure 1 - Install Rear Ember Bed, Figure 6 - Install Center Top Log, Figure 2 - Install Rear Log, Figure 3 - Install Middle Log, Figure 4 - Install Left and Right Front Logs, Figure 5 - Install Left Top Log

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
2
Log PLacEMEnt InStRUctIonS
1. Place rear ember bed as shown in Figure 1.
Figure 1 - Install Rear Ember Bed
Install
Ember bed
from behind
top burner
top Burner
Rear Ember Bed
2. Place rear log onto the two rear grate locating pins as shown
in Figure 2 (the locating pins are outlined in Figure 1).
Locating
Pins
Rear Log
Rear Locating Pins
on grate assembly
3. Place middle log onto left middle grate locating pin and the
rear ember bed locating pin as shown in Figure 3.
Middle Log
Locating Pins
4. Place left and right front logs onto front grate locating pins as
shown in Figure 4.
Locating Pins Indicated by arrows
Right Front Log
Left Front Log
5. Place left top log onto rear log and middle log locating pins
as shown in Figure 5.
6. Place the center top log onto the rear log locating pin and
middle log locating pin as shown in Figure 6.
Left top Log Locating Pins
center top Log
Locating Pins
Figure 2 - Install Rear Log
Figure 3 - Install Middle Log
Figure 4 - Install Left and Right Front Logs
Figure 5 - Install Left Top Log
Figure 6 - Install Center Top Log
Position Ember Bed All the Way
Forward in Gas Train Assembly