HEARTH PRODUCTS KITS AND ACCESSORIES
750,245M
REV. N/C 02/2007
MPE-27 LEVELING LEG FIELD FIX KIT
INSTALLATION INSTRUCTIONS FOR
GENERAL INFORMATION
This kit was designed to provide an alternate leg configuration for use when previously used bracketed legs may interfere with tightly framed installations.
Kit Contents:
Rubber Legs - Four (4), Sheet Metal Screws - Four (4), Instruction Sheet - One (1).
Tools Required:
Phillips screwdriver, or Drill-Driver with Phillips Bit.
INSTALLATION INSTRUCTIONS
Disconnect power and allow the electric fireplace to cool before starting any work.
Step 1. Tilt the unit back and rest it on its rear panel.
Step 2. Unscrew the eight (8) screws and remove the four (4) leveling brackets with legs from both sides of the fireplace (see Figure 1 ). Step 3. Remove the four existing screws from the bottom of the fireplace and discard.
Step 4. Attach the provided rubber legs with provided sheet metal screws to the fireplace bottom, using the existing mounting location (Figure 1 ).
Step 5. Return the fireplace to its upright position.
Existing Mounting Hole | Existing Leveling Leg |
And Location Of New Rubber Leg | With Bracket |
Figure 1 | Unit Resting On Rear Panel |
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and also to discontinue colors, styles and products. Consult your local distributor for fireplace code information.
Printed in U.S.A. © 2007 by Lennox Hearth Products | LHP |
| 1110 West Taft Avenue | |
P/N 750,245M REV. N/C 02/2007 | Orange, CA 92865 |