screen face kit
MODeL raVeLLe™ 42
instaLLatiOn instrUctiOns fOr instaLLinG screen
face kit fOr Use with the raVeLLe™ 42 Gas firePLace
775,289M
rev. a, 10/2008
HEARTH PRODUCTS
KITS AND ACCESSORIES
kit cOntents (see Figure 1):
Please ensure that all these parts are included
1 ea. Screen Face [Complete] (A)
1 ea. Two Upper Brackets w/Screws (B)
1 ea. Two Lower Brackets w/Speed Nuts (C)
1 ea. Mounting Hardware (D)
- 6 ea. #10 Washers
- 6 ea. 10-24 Hex Nuts
- 4 ea. 10-24 Allen Head Screws
- 2 ea. 1/4” 20 Phillips Head Screws
1 ea. Instruction Sheet
cat. no. Model Description
75029 screen-42 screen face, Double Door, Black
a
nOte: DiaGraMs & iLLUstratiOns are nOt tO scaLe 1
TM
Figure 1 - Kit Contents
tOOLs neeDeD:
Phillips Head Screw Driver
3/8” Socket/nut Driver
5/32” Allen Wrench or T-Handle Wrench
GeneraL infOrMatiOn
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local distribu-
tor or dealer.
Read this instruction sheet in its entirety before beginning the installa-
tion.
all of these parts may scratch and bend, great care should be used
in handling them.
aLL warninGs anD PrecaUtiOns in the instaLLatiOn anD
OPeratiOn ManUaL PrOViDeD with the aPPLiance aPPLY tO
these instrUctiOns.
tUrn Off the firePLace anD aLLOw it tO cOMPLeteLY cOOL
BefOre PrOceeDinG.
instaLLatiOn instrUctiOns
step 1. Ensure the reveal corner is positioned as shown in Figure 1. If it
needs to be adjusted to the position shown in Figure 1, see Page
12 of the Installation and Operation Manual.
D
c
B
Figure 2
reveal corner
adjustment
for arch face
OnLY
Reveal Corner Adjusted
for Arch Face
Reveal Corner
reveal corner
expanded View of
reveal corner
wrOnG